Vibrating Table Manufacturing Artificial Stone Nano Cement Plast | Vibrating table 150 x 300 cm non-standard production of artificial stone cement Plast | Why not use a non-standard vibration table to produce artificial stone

Due to a lot of explanations about the difference between the vibrating tables of artificial stone facade & polymeric mosaic and other vibration tables in various places of the site of HUNAM Artificial Stone Co (BAGHERI machine manufacturing) was presented. in this section, the technical specifications of the vibrating table are indicated at 300 * 150 cm, along with some of the bugs on this type of vibrating table

Technical specification of vibrating table of artificial stone facade & polymeric mosaic with dimensions 3 * 1/5 with two electric Engine: a 150 * 300 cm vibrator table with two 800 kg electric engine (high quality) and 6 mm aerodynamic plate - chassis 16 - special springs 8 pcs

Vibrating tables with dimensions of 150 * 300 cm are not in standard dimensions and do not provide good vertical blows and we may have much less blows in the center of the vibrating table than the other parts. if you have considered this vibrating table, it is better with the equal technical specification, select a vibrating table 195 * 130 cm.

-if you use a 3 * 1/5 meter vibrating table, despite the chassis 16, 6 mm surface sheet, you should use two 850-800 kg electric Engine. Because the iron 16, in practice, in the long run, it does not tolerate more than 900-800 kg. and breaks

If with the dimensions of 300 x 150 cm sheet of 8 mm be used, should be used the central chassis with the power of 1,100 kg of electric engine. in the dimensions of 300 * 200 with chassis 16 and central chassis, with 8 mm sheet, two 1300 kg electric engine are used.

Sample of standard vibration table is shown below: