Print
Parent Category: Artificial Stone - Adhesives & additives Equipment Specifications
Category: Vibrator Table Cement-Plast Artificial Stone | Vibrator Table Solid Surface Stone

Machine manufacturing and making types of vibration table for making mosaic | Animated vibrating table | Vibrating table with horizontal blows and carrier | Vibrating table for soft molds

To produce various types of concrete products and vibration mosaic manufacturing - pebble design mosaic, due to the use of soft molds, rubber molds (silicon molds, soft PVC molds, polyurethane molds) or on artificial stone used only from soft mold, the horizontal vibrating table should be used. the vibrating tables due to low width to length ratio, Placement the vibration motor at 45 degrees relative to the table surface and chassis, the placement of the metal triangle on both sides and ... has horizontal blows (carrier). from this vibrating table (Carrier vibrating table) can't be used to produce products with dry molds (HP, ABS).

*In order to produce concrete and similar products, if the shape of the molds is soft, such as rubber mold, silicone mold and... should be horizontal blows and if the mold is dry, such as metal mold, ABS molds and HP molds and fiberglass, and... should be used with vertical blows. the task of the vibrating table is to convey the density in the internal tissue of the stone and reduce the micro-holes in the tissue, guiding the grain style and color layer to the surface of work, reducing the amount of surface holes in the product and...in the event that, in dry molds of horizontal blows and or in the soft mold of vertical blows, in no way will not get the required specifications.Vibration Mosaic Making Table Manufacturing of various vibrating table mosaic and concrete products*Horizontal vibrating tables (with low width and long lengths and has an electric engine) only can create horizontal blows. but 100 * 200 or 200 * 300 vibrating tables with two vibrating electric engines can create horizontal blows and vertical blows.

Animated vibrating table or with horizontal blows to the different modes are made. if the surface of the vibration table is made with aerodynamic sheet (metal sheet with a large hole), if the holes in the vibration table are filled with material over time, cause reduces the amount of vibration and lack of proper movement of mold on the surface of the table and... therefore, it is recommended that the surface of the vibration table be made with a suitable can (in which the surface of the table is not resistant) or better to be made by the iron 6 in the form (V).Vibration Mosaic & Concrete Parts Mobile vibrating tableMosaic & Mosaic Concrete Washers Vibrating table. Soft and rubber molded moldingManufacturing various types of vibration boards in various dimensions for the production of mosaics and artificial stoneThe advantages of using this method (vibrating table with iron surface) can to the high endurance the vibrating table, no need to clean, unlike the surface of the sheet (not filling the hole), move the mold better on the surface of the vibrating table, reducing engine power due to the lack of the use heavy side sheets, reducing depreciation and... cited. vibrating tables with dimensions 50-40 in length 3 to 3.5 meters are usually horizontal and movable. therefore, the width of these vibration tables is to be larger, the length of them must also be proportional to the width.

Contact us to get advice and buy a horizontal vibrating table.Homemade | Mosaic vibration table | Concrete vibrating table | Vibrating Center | Sell vibration table